Well the build of the heli went fine it took about five hr. with all the loctite and finding a good place for all the elct. i put the esc under the batt. plate like the book showed but i had to mount the rx under the heli the ar7000 is a bit big and the wip up to the gyro plate just below the gyro and then i took it to my local hobby shop to have it looked at and set up so im going to pick it up saterday and get a crash corse in the set up on the neli and tx so wish me luck and happy hovering !!!

When life hands you lemons , Find a guy thats life is handing him vodka and have a party . - Ron White -

T-Rex 450 Pro , DX7se TX , AR7000 RX , Stock
Real Flight G5

On you first attempt put some training gear on and take it slow and easy, Slowly increase the collective until the heli is light on the skids to get a feel for what it's going to do.
Good luck.

LAKERS back 2 back CHAMPIONS

im going to be real nerves on the first flight ill prob. just slide around on the training gear so wish me luck . I'll tell you the people on this forum have been so helpful that i want to thank you all !!

When life hands you lemons , Find a guy thats life is handing him vodka and have a party . - Ron White -

T-Rex 450 Pro , DX7se TX , AR7000 RX , Stock
Real Flight G5

When life hands you lemons , Find a guy thats life is handing him vodka and have a party . - Ron White -

T-Rex 450 Pro , DX7se TX , AR7000 RX , Stock
Real Flight G5

Glad to hear it's all comming together for you.

Like everyone is saying, take it slow and easy. This is somewhere that baby steps is good. And don't let your buddy convince you to fly loops either! LOL.


Ted

Ted Schubert
I always have fun. Some times are more fun than others.
I can't remember half the crap I forgot.

Align TREX 600 CF/Spectrum DX 7 TX/ AR 7000 RX/Align RCM-BL600XL Motor/Align RCE-B3X BEC/Align RCE-BL7G Speed Controller/Futaba S9252/Logiteck LTG-6100T w/ Servo

Align Trex 450 SEV2/AR6000/Scorpion Commander 45A ESC
Scorpion HK 2221-8 Motor/GY 401 Gyro/HiTec HS65MG Servos

One more day and the heli comes home . I have a ? can someone explane lipos for me ive never used lipos befor and heard they are dangrous i bought a beatman BC6 duel power and the wips for it and woundred if someone could walk me through the chargeing

When life hands you lemons , Find a guy thats life is handing him vodka and have a party . - Ron White -

T-Rex 450 Pro , DX7se TX , AR7000 RX , Stock
Real Flight G5

I can't help much with this. One thing I will say is NEVER leave your batteries alone while charging and use some thing like a lipo sack http://www.readyheli.com/REat_Sleep... /lipo_bag.htm when charging
and don't run the battery all the way down.

LAKERS back 2 back CHAMPIONS

You meant Bantam BC6 right? What batteries are you using? Then we can go from there. Certain batteries are going to need a different connection board than the one you got with the charger( if any).

This chart will tell you what the balance tap is for each battery. Then you need to get the right board for the tap. You can also get across over connector for similar batteries you are using.

http://www.rcaccessory.com/pdf/Batt...ion%20Guide.pdf

Blax1 also has the same charger and will be able to chime in.

"BARNSTORMERS" Vermont Modelers Club Secretary

Anybody use this one? Since my battery supply seems to grow and I usually keep them in old coffee cans this might be nice. Holds 16 lipos.

http://www.commonsenserc.com/produc...products_id=805

Nobody realizes that some people expend tremendous energy merely to be normal. - Albert Camus

I've been charging my batteries in a lipo sack similar to the one posted works fine, As for storage I just picked this up for $7 from my local surplus store.

Attached Images

 

LAKERS back 2 back CHAMPIONS